DC4 Series – Terminator Diffuser Collar
TerminatorTM (DC Series) from Primex is a termination for round ducting and a collar for diffusers and grilles in air distribution systems. The strong, industrialgrade plastic is durable and lightweight. Terminator is the solution to sloppy, inaccurate termination of HVAC ducting. This unique product is ideal for HRV, ERV and in-line fan supply and exhaust terminations. Simply hold it in place on the joist or stud; it attaches in seconds. The 90° back-stop ensures a level mounting position. Ducting fits over the top collar and the rigidity the bottom circular opening ensures the diffusers and grilles stay snug against the finished surface.
• Quick and easy installation with no sharp edges.
• Can be used for ceiling or wall terminations.
• Preset for 1/2 and 5/8-inch drywall.
• 90° back-stop for a level, uniform installation with bottom flange for a permanent air seal.
• Off-set from joist for easy installation of ducting and clearance for application of tape or sealer.
• Duct-Stop-Point ensures no screws penetrate the collar and impede the insertion of the grille.
• A rigid bottom flange guarantees the drywall router tool conforms to the circular opening.
• V-shaped indentations on bottom edge for centering with previously installed fixtures.
• Black (11)
WG Series – Adjust-a-Vent Ceiling Diffusers – HVAC Whisper Grille
The Primex Adjust-A-Vent Ceiling Diffusers (WG Series) are durable, adjustable air supply or exhaust vents. This ceiling or wall mountable series provides whisper quiet airflow in an unobtrusive and aesthetically pleasing housing. Pair it with the diffuser sleeve (DS Series) or the EB4x90 for simple, accurate installation. *Can be used for 4, 5 or 6in ducting.
WGX Series – True-Flow Ceiling Diffusers
The Primex True-Flow Ceiling Diffusers (WGX Series) are durable, highly-adjustable air supply or exhaust vents. The ceiling mountable Series provides whisper-quiet airflow in an unobtrusive and aesthetically pleasing housing. Pair the 4-inch model with the EB4x90 for installation in tight spaces. *Can be used for 4, 5, 6, 7 or 8in ducting.